49-60769 Rev. 3
11
1.
8QVFUHZVFUHZVRQWRSRIIURQWFDVH
2.
Remove top front case cover and cover insert. The
cover insert slides out toward the bottom of the
cover.
3.
Remove the hinge cover. Carefully pull the wires
IUHHRIWKHFOLSV'LVFRQQHFWWKHZLUH
4.
Remove the top door cap by inserting a flat head
screw driver into the gap between the door cap
and door case. Apply pressure to pop the door
cap out.
5.
8QVFUHZWKHWRS
hinge from the
cabinet while
holding the door.
6.
Lift the door
straight off of the
bottom hinge. Set
the door aside.
7.
8QVFUHZDQG
remove the
bottom hinge
from the
cabinet.
INST
ALLA
TION INSTRUCTIONS
Installation Instructions
When reversing the door swing:
• Read the instructions all the way through before
starting.
• Tighten all hinge screws but avoid over-tightening
to prevent stripping.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid
losing them.
• Provide a non-scratching work surface for the
doors.
CAUTION
Lifting Hazard
7KH)UHVK)RRGDQG)UHH]HUGRRUVDUHKHDY\8VH
both hands to secure the doors before lifting.
IMPORTANT:
Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges from
WKHULJKWVLGHWRWKHOHIWVLGH²LI\RXHYHUZDQWWR
change the hinges back to the right side, follow these
same instructions and reverse all references to left
and right.
IMPORTANT NOTES
REVERSING THE DOOR SWING
Phillips screwdriver
)ODWKHDGVFUHZGULYHU
TOOLS REQUIRED
Masking tape
BEFORE YOU START
1. Unplug the refrigerator from its electrical
outlet.
2.
Empty all door shelves, including the dairy
compartment.
IMPORTANT:
'RQRWOHWGRRUGURSWRWKHIORRU7R
do so could damage the door stop.
Pliers
7RS'RRU&DS
Hinge Cover
Clips
Hinge
Screws
&RYHU,QVHUW
Pull
'RZQ
)URQW
Case
Cover
Screws
Hinge
Screws
Bottom Hinge
WARNING
)ROORZDOOVWHSVZKHQUHYHUVLQJ
WKHGRRUVZLQJ)DLOXUHWRIROORZWKHVHLQVWUXFWLRQV
leaving off parts, or overtightening screws, can lead
to the door falling off and result in injury and property
damage.
