Consejos para la solución de problemas
¡Ahorre tiempo y dinero! Consulte primero las tablas de las páginas siguientes o
visite
GEAppliances.com
y quizás no necesite llamar al servicio.
Problema
Causas posibles
Solución
La secadora se mueve
El movimiento/ruido es normal.
• Desplace la secadora a un lugar nivelado, o ajuste
o hace ruido
La secadora puede estar colocada
las patas niveladoras según sea necesario.
en un lugar desnivelado
Las prendas tardan
Conducto inadecuado u obstruido
• Controle las Instrucciones de instalación para verificar que
mucho en secarse
la ventilación de la secadora sea la correcta.
• Verifique que el conducto se encuentre limpio, libre
de abolladuras y sin obstrucciones.
•
Controle que el regulador de tiro externo de pared funcione
bien.
Clasificación inadecuada
• Separe prendas pesadas de livianas (generalmente, una
carga bien clasificada para la lavadora es una carga bien
clasificada para la secadora).
Cargas grandes de telas pesadas
• Las telas grandes y pesadas contienen más humedad y
(como toallas de playa)
tardan más en secarse. Separe las telas grandes y pesadas
en cargas más pequeñas para acelerar el tiempo de secado.
Los controles están mal
• Ajuste las configuraciones de control a la carga que esté
configurados
secando.
El filtro de pelusas está lleno
• Limpie el filtro de pelusas antes de cada carga.
Fusible quemado o disyuntor
• Cambie los fusibles o reconfigure los disyuntores. Ya que
accionado
la mayoría de las secadoras utilizan 2 fusibles/disyuntores,
asegúrese de que ambos estén funcionando.
Carga excesiva/cargas
• No coloque más de una carga en la secadora por vez.
combinadas
Poca carga
• Si va secar sólo una o dos prendas, agregue algunas
más para asegurar un secado correcto.
Se ha seleccionado
La carga consiste de
• Cuando combine telas pesadas con livianas en una carga,
el nivel de secado Dry
una combinación de telas
escoja
More Dry
(
Más seco
).
(Seco) pero la carga aún
pesadas y livianas
se encuentra húmeda
El sistema de escape está tapado
• Inspeccione y limpie el sistema de escape.
Las teclas de control
Los controles se accionaron
•
Presione
Start/Pause
(
Inicio/Pausa
).
no responden
accidentalmente en el modo
de servicio
Los controles se accionaron
•
Sostenga el botón
Lock Control
(
bloqueo de control
)
accidentalmente en el modo
durante 3 segundos para desbloquear la secadora.
de de bloqueo
Los controles efectuaron una
• Reconfigure el disyuntor.
operación incorrecta
La secadora no se
El panel de control está “dormido”
• Esto es normal. Presione
Power
(
encendido
) para activar
enciende
el panel de control.
La secadora está desenchufada
• Verifique que el enchufe de la secadora esté bien colocado
en el tomacorriente.
Fusible quemado/disyuntor
• Verifique la caja de fusibles/disyuntor del edificio y cambie
accionado
el fusible o reconfigure el disyuntor.
NOTA:
Las secadoras
eléctricas utilizan dos fusibles o disyuntores.
La secadora se puso en pausa
• Si la luz del botón
Start/Pause
(
Inicio/Pausa
) destella, la
accidentalmente cuando se iniciaba
secadora se encuentra en pausa. Presione
Start/Pause
Delay Dry (
Secado retardado
)
(
Inicio/Pausa
) para volver a iniciar la cuenta regresiva.
Antes de llamar al servicio de asistencia técnica…
GEAppliances.com
17