GE GEP Скачать руководство пользователя страница 21

Страница: 21 / 24

：

For Brazil Max. Output Power GEP50-10 is 50000W, GEP60-10 is 60000W.

：

For Brazil Max. Output Apparent Power GEP50-10 is 50000W, GEP60-10 is 60000W.

：

For Brazil Nominal Output Voltage GEP50-10 is 380V, GEP60-10 is 380V.

：

For Brazil Communication GEP50-10 is RS485, WiFi, USB, PLC (Optional); GEP60-10 is RS485,WiFi,USB,PLC (Optional).

Moisture parameters

Temperature Range

Humidity Range

3K3

0~+40℃

5%～85%

4K2

-33~+40℃

15%～100%

4K4H

-20~+55℃

4%～100%

Level

Note：

Overvoltage Category Deﬁnition

Category I: applies to equipment connected to a circuit where measures have been taken to

reduce transient overvoltage to a low level.

Category II: applies to equipment not permanently connected to the installation. For example,

appliances, portable tools and other plug-connected equipment;

Category III: applies to ﬁxed downstream equipment, including the main distribution board. For

example,switchgear and other equipment in an industrial installation;

Category IV: applies to equipment permanently connected at the origin of an installation

(upstream of the main distribution board).For example, electricity meters, primary
overcurrent protection equipment and other equipment connected directly to
outdoor open lines.

Moisture Location Category Deﬁnition

Environment Category Deﬁnition

Outdoor : the ambient air temperature is -20~50℃. Relative humidity range is from 4% to 100%,

applied to PD3.

Indoor unconditioned: the ambient air temperature is -20~50 ℃. Relative humidity range is from

5% to 95%, applied to PD3.

Indoor conditioned: the ambient air temperature is 0~40 ℃. Relative humidity range is from 5% to

85%, applied to PD2.

Pollution Degree Deﬁnition

Pollution degree 1: No pollution or only dry, non-conductive pollution occurs. The pollution has

no inﬂuence.

Pollution degree 2: Normally only non-conductive pollution occurs. However, a temporary

conductivity occasionally caused by condensation must be expected.

Pollution degree 3: Conductive pollution occurs. Or dry, non-conductive pollution becomes

conductive due to condensation, which is expected.

Pollution degree 4: Persistent conductive pollution occurs. For example, the pollution cause by

conductive dust, rain and snow.

Integrated
Integrated
Integrated

Optional

Type II(Type I optional)

Type II

Integrated
Integrated
Integrated
Integrated

Class I

-30~60

0~100%

≤3000

Fan Cooling

LCD & LED or APP & LED

520*660*220

IP65

Transformerless

IEC62109-1&2

EN61000-6-1,EN61000-6-2,EN61000-6-3,EN61000-6-4

Technical Data

PV String Input Data

Max. DC Input Power (W)
Max. DC Input Voltage (V)
MPPT Range (V)
Start-up Voltage (V)
Nominal DC Input Voltage (V)
PV Input Operating Voltage range

（

）

Max. Inverter Backfeed Current To The array (A)
Max. Input Current (A)
Max. Short Current (A)
No. of MPP Trackers
No. of Input Strings per Tracker

AC Output Data

Nominal Output Power (W)
Max. Output Power (W)
Max. Output Apparent Power (VA) [1]
Nominal Output Voltage (V)
Nominal Output Frequency (Hz)
Max. Output Current (A)
Output Power Factor
Output THDi (@Nominal Output)
Current

（

inrush

）

Maximum Output Fault Current
Maximum Output Over Current Protection (A)

Efficiency

Max. Efficiency
Europen Efficiency

Protection

Anti-islanding Protection
Input Reverse Polarity Protection
PV String Current Monitoring
Anti-PID Function for Module
DC Surge Protection
AC Surge Protection
Residual Current Monitoring Unit
Output Over Current Protection
Output Short Protection
Output Over Voltage Protection
Protective Class
Decisive Voltage Classification

（

DVC)

General Data

Operating Temperature Range (

℃

)

Relative Humidity
Operating Altitude (m

）

Cooling
User Interface
Communication
Weight (kg)
Size (Width*Height*Depth mm

）

Protection Degree
Night Self Consumption (W)
Topology

Certifications & Standards