Chapter 5: Web-Based Management
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
69
Aggregator setting
This section provides Port Trunk-Aggregator Setting of each port from the Switch, the
screen in Figure 5-20 appears.
Figure 5-20: Port Trunk-Aggregator Setting interface (two ports are added to the left field with
LACP enabled)
This page includes the following fields:
Object
Description
System Priority:
A value which is used to identify the active LACP. The Managed Industrial
Switch with the lowest value has the highest priority and is selected as
the active LACP peer of the trunk group.
Group ID:
There are 13 trunk groups to be selected. Assign the "Group ID" to the
trunk group.
LACP:
When enabled, the trunk group is using LACP. A port which joins an LACP
trunk group has to make an agreement with its member ports first.
Please notice that a trunk group, including member ports split between
two switches, has to enable the LACP function of the two switches. When
disabled, the trunk group is a static trunk group. The advantage of having
the LACP disabled is that a port joins the trunk group without any
handshaking with its member ports; but member ports won’t know that
they should be aggregated together to form a logic trunk group.
Содержание GE-DSH-73
