background image

6

Care and cleaning of the refrigerator.

Cleaning the Outside

Keep the outside clean. Wipe with a clean 

cloth lightly dampened with mild liquid dish 

detergent. Dry with a clean, soft cloth. 
Do not wipe the stainless steel door with 

a soiled dishcloth or wet towel. These 

may leave a residue that can erode the 

finish. Do not use scouring pads, powdered 

cleaners, bleach or cleaners containing 

bleach because these products can 

scratch and weaken the finish. Use only a 

liquid cleanser free of grit and rub in the 

direction of the brush lines.

The stainless steel doors and door handles 

(on some models) can be cleaned with 

a commercially available stainless steel 

cleaner. Cleaners with oxalic acid such as Bar 

Keepers Friend Soft Cleanser™ will remove 

surface rust, tarnish and small blemishes. 

Use only a liquid cleanser free of grit and 

rub in the direction of the brush lines with a 

damp soft sponge. Do not use appliance wax 

or polish on the stainless steel.
Protect the paint finish. The finish on the 

outside of the refrigerator is a high quality, 

baked-on paint finish. With proper care, it 

will stay new-looking and rust free for years. 

Apply a coat of kitchen/appliance wax when 

the refrigerator is new, and then at least 

twice a year.

Cleaning the Inside

To help prevent odors, leave an open box 

of baking soda in the fresh food and freezer 

compartments.
Unplug the refrigerator before cleaning.  

If this is not practical, wring excess moisture 

out of sponge or cloth when cleaning around 

switches, lights or controls. 

8VHZDUPZDWHUDQGEDNLQJVRGDVROXWLRQ³

about a tablespoon (15 ml) of baking soda to 

a quart (1 liter) of water. This both cleans and 

neutralizes odors. Rinse and wipe dry.

2WKHUSDUWVRIWKHUHIULJHUDWRU³LQFOXGLQJGRRU

gaskets, fruit and vegetable drawers, and all 

SODVWLFSDUWV³FDQEHFOHDQHGWKHVDPHZD\

After cleaning the door gaskets, apply a thin 

layer of petroleum jelly to the door gaskets 

at the hinge side. This helps keep the gaskets 

from sticking and bending out of shape. Do 

not use cleansing powders or other abrasive 

cleaners.

CAUTION

 

Do not clean glass 

shelves or covers with warm water 

when they are cold. Glass shelves and 

covers may break if exposed to sudden 

temperature changes or impact such as 

bumping or dropping. Tempered glass is 

designed to shatter into many small pieces 

if it breaks.

Do not wash any plastic refrigerator parts 

in the dishwasher.

Содержание GBE10ES

















Отзывы: