GE G7KE17SSPSS, Руководство пользователя

Страница: 5 / 16

49-9000005 Rev. 1
5
Using the Kettle
Care and Cleaning
USING THE KETTLE
Before Getting Started
:KHQXVLQJIRUWKH¿UVWWLPHRUDIWHUDOHQJWK\SHULRGRI
GLVXVHZHUHFRPPHQGHGWR¿OOWKHSURGXFWXSWRWKH0D[
mark with cold water, bring to boil, then discard the water
and repeat. This will remove potential extraneous and
unwanted residues.
Operation of Mechanical Model: G7KE17SSPSS
This appliance is for household use only.
• Press the lid release button to open the lid.
‡)LOOWKHSURGXFWZLWKZDWHU'R127¿OODERYHWKHPD[
line).
• Fill at least 2 cups of water.
• Close the lid. Place the product on the base.
‡&RQQHFWWKHSOXJWRDSRZHURXWOHW3UHVVWKH2Q2ႇ
switch down.
• The light goes on, the product is now heating the water.
‡7KHSURGXFWZLOOVZLWFKRႇDXWRPDWLFDOO\ZKHQWKHZDWHU
starts boiling. The light will then go out.
• The product features a safety switch that shuts it down if
it boils dry. If this should occur, remove it from the base
and wait until it cools down before using it again. NOTE:
The kettle should ONLY be used with the base provided.
Operation of Electric Model: G7KD15SSPSS
This appliance is for household use only.
• Press the lid release button to open the lid.
‡)LOOWKHSURGXFWZLWKZDWHU'R127¿OODERYHWKHPD[
line).
• Fill at least 2 cups of water.
• Close the lid. Place the product on the base.
• Connect the plug to a power outlet. Press the Power
button located on the product handle.
• Choose desired temperature using the -/+ buttons.
‡7KHSURGXFWZLOOVZLWFKRႇDXWRPDWLFDOO\ZKHQWKHZDWHU
reaches the set temperature.
• The product features a safety switch that shuts it down if
it boils dry. If this should occur, remove it from the base
and wait until it cools down before using it again. NOTE:
The kettle should ONLY be used with the base provided.
%XUQ+D]DUG'RQRWRYHU¿OONHWWOH
• Water might enter the steam tube and leak from the
bottom of the product
• Boiling water might spill out of the spout.
• Regular cleaning will prolong the lifespan of the product.
• Always unplug from the plug socket and allow to cool
down before cleaning. Do not immerse any part of the
product in water or other liquid.
• It is normal for stainless steel to discolor.
• Do not use chemical or abrasive agents (or tools) to
clean the outside of the product. These may damage
the outside surface.
• Fill the product up to the MAX mark with a half water,
half white vinegar solution and let it sit for over 1 hour to
descale.
‡3RXUWKHVROXWLRQRXWRIWKHSURGXFW:LSHRႇWKH
residues (if any) with a damp cloth.
• Fill the product with clean water, bring to boil and then
discard the water.
• To clean the kettle thoroughly, it may be necessary to
repeat the cleaning process above several times.
• Wipe the outside surface with a damp cloth and then
wipe dry with a soft cloth.
• Any other servicing should be performed by an
authorized service representative.