background image

13 

 

Press 

 or 

  key to select the required submenu and press 

“INT/OK” key. 

 

Press 

 or 

  key to select the required dialing mode and 

press “INT/OK” key. 

Note: This Flash Time / Dialing mode is used only when dialing 
from handset.    Use the Base switch when dialing from Base. 

Changing the PIN 

 

Press 

 key until the BASE menu appears and press 

“INT/OK” key. 

 

Press 

 or 

  key to select the required submenu and press 

“INT/OK” key. 

 

Enter old PIN (0000) and press “INT/OK” key. 

 

Enter new PIN (e.g. 1111) and press “INT/OK” key. 

 

Enter new PIN again (e.g. 1111) and press “INT/OK” key to 
confirm. 

Default Settings 

 

Press 

 key until the BASE menu appears and press 

“INT/OK” key. 

 

Press 

 or 

  key to select the required submenu and press 

“INT/OK” key. 

 

Enter the PIN (factory setting = 0000) and press “INT/OK” key. 

 

Press “INT/OK” key to confirm. 

Deregister HS 

If several handsets are registered on one base station, they can 
deregister each other mutually. The last handset can not be 
deregistered. 

 

Press 

 key until the BASE menu appears and press 

“INT/OK” key. 

 

Press 

 or 

  key to select the required submenu and press 

“INT/OK” key. 

 

Enter the PIN (factory setting = 0000) and press “INT/OK” key. 

 

If necessary, Use 

 or 

 key to select the handset and 

press “INT/OK” key. 

 

Press “INT/OK” key to confirm. 

 
 
 
 

Technical Specifications         

 
Handset Operating Time: 
(average values*) 

Approx. 10 hours talk time 
Approx. 100 hours standby 

AC / DC Adaptor 

3515-0635-ADC 
Input: 230V AC / 50 Hz 
Output: 6V DC, 350mA 
Single-phase AC excluding IT 
installations defined by the EN 60950 
standard. 
Caution: the network voltage is classified 
as a hazard by the criteria of this 
standard. 

AC / AC Adaptor (for 
Handset charging) 

3515-0720-AAC 
Input: 230V AC / 50 Hz 
Output: 7V AC, 200mA 
Single-phase AC excluding IT 
installations defined by the EN 60950 
standard. 
Caution: the network voltage is classified 
as a hazard by the criteria of this 
standard. 

Telephone connection 

Appliance designed for connection to an 
analogue telephone line class TNV3 
(telecommunications network voltage) as 
defined by the EN 60950 standard. 

Rechargeable Battery 

GP60AAAHC, 1.2V / 600mAh / Ni-MH, 
AAA x 2 or equivalent 

Operating Temperature: 

0 to 45 

o

C  

* For guidance only, depends on initial battery charge. 
 

Содержание FS21828















Отзывы: