GE ETS series, Техническое обслуживание руководство

Страница: 18 / 36

– 16 –
Overload (Compressor)
1. Remove the PTCR relay/overload cover (see
procedure).
2. Remove the PTCR relay (see procedure).
3. Pull the overload straight out from the
compressor.
4. Disconnect the wire lead from the overload.
Capacitor (Compressor)
1. Remove the machine compartment cover.
GEA01168
Capacitor Capacitor
Wire Leads Wire Leads
Capacitor
Wire Leads
2. Disconnect the wire leads from the capacitor.
3. Discharge the capacitor with a screwdriver.
4. Remove 1 screw and the capacitor.
Compressor
Note:
•
Capillary tube must be clipped to compressor
suction line near the dryer. If capillary tube is not
clipped to suction line, a knocking noise may occur
during compressor operation.
• The channel in which the compressor is
mounted must be disengaged from the cabinet to
remove the compressor.
• Ensure that harness connectors are connected
completely and that connector clips are engaged.
If connectors are not connected correctly, they
may vibrate apart.
Refer to the compressor replacement instructions
included with the replacement compressor.