GE DSR-2000e, Руководство пользователя

Страница: 16 / 70

Alarm Recording
ALARM
When an alarm condition is detected, the unit automatically switches to the
alarm record speed. The alarm condition is indicated in several ways:
•
With the word
ALARM
, displayed on the primary monitor, near the
upper left hand corner of the screen.
•
With the LED Alarm Indicator on the front panel of the unit.
•
With the internal buzzer (if activated in the menu system). For
information about activating the internal buzzer during alarms, see
Main Menu
→
Alarms on page 4-3 of the Operator programming
section of this manual.
•
By an external device, connected to the alarm output of the unit (if
the unit is installed that way).
Alarm Indicator
The alarm record speed cannot be changed using the Up/Down Record Speed buttons on the front
panel. The alarm record speed must be changed in the menu system. For information about altering
the alarm record speed, see
Main Menu
→
Record Settings
→
Alarm Record Speed , on page 4-7
of the Operator Programming section of this manual.
The front panel LCD displays the normal record speed during and alarm condition.
The unit returns to the normal record speed when the alarm condition ends.
Disk Nearly Full Notification
Message
Disk Full. Recording Has Stopped.
[OK]
This message will appear on the primary monitor to
indicate that the unit has stopped recording, because
the disk is full.
In No Overwrite mode: The user must acknowledge
the on-screen message by pressing the Enter button.
Unit will not record over previously recorded data. To continue recording, the data must be erased (or
deleted) in the
Advanced
→
Disk Maintenance menu.
In Overwrite Once mode: The user must acknowledge the on-screen message by pressing the Enter
button.
The unit will continue recording again when the user presses the
Record button.
2.2 Playback
Figure 2-2 LCD during playback
12:34:45A
12/17/2003
PLAY>
A0.2p
1
2
3
4
1. Time the data was recorded.
2. Date the data was recorded.
3. Play Forward mode indicated.
4. Normal record speed in Pictures Per Second. If the letter A precedes the record rate, the unit is
configured to record or playback audio.