User Manual
Druck DPI612
Page 76 of 105
[EN] English – 109M4017 Revision -
In Data Logging mode the display data from all active channels is
stored at each data point.
The data can be stored:
•
Periodically
•
Key press
The data is stored in the internal memory or on a USB Flash Drive
connected to the Unit until the Data Logging is stopped.
SET-UP
3.1
Before starting, set all channels to the correct functions. (
See
Chapter2
). To access the Data logging function do the following:
Figure 3-2 Data logging Setup
•
FILENAME
Enter the filename (10 characters maximum).
DASHBOARD >>
DATA LOGGING>> SETUP
