User Manual
Druck DPI612
Page 38 of 105
[EN] English – 109M4017 Revision -
2
OPERATIONS
Common Operations
2.1
2.1.1
Attach/Remove the device under test
Pressurized gases are dangerous. Before you attach or disconnect pressure
equipment, safely release all the pressure
To prevent damage to the instrument, do not let dirt get into the pressure
mechanism. Before you attach equipment, make sure it is clean or use the
applicable dirt trap.
The test port uses “Quick fit” pressure adaptors;
See
Section 1.10
(Accessories). These are easy to remove,
change and install (See 1.11.13).
Figure 2-1
Pressure Port
