User Manual
Druck DPI612
Page 14 of 105
[EN] English – 109M4017 Revision -
•
Wipe the battery terminals with a clean dry cloth if they become
dirty.
•
If you find rust, a bad odour, overheating and/or other irregularities
when using the battery pack for the first time, return it to your
supplier or vendor.
•
For further information contact the nearest distributor or
representative.
•
Retain the original product literature for future reference.
PRESSURE WARNINGS
1.7
•
It is dangerous to attach an external source of pressure to a
DPI612 pressure station. Use only the internal mechanisms to set
and control pressure in the pressure station.
•
To prevent a dangerous release of pressure, isolate and bleed the
system before disconnecting a pressure connection.
•
To prevent a dangerous release of pressure, make sure that all the
related pipes, hoses and equipment have the correct pressure
rating, are safe to use and are correctly attached.
•
To prevent damage to the DPI612 calibrator, only use it within the
specified pressure limits.
•
Do not exceed the maximum pressures stated in the appropriate
component manual for the unit under test.
•
Reduce pressure at a controlled rate when venting to atmosphere.
•
Carefully de-pressurize all pipes to atmospheric pressure before
disconnecting and connecting to the unit under test.
•
Always wear appropriate eye protection when working with
pressure.
