GE Dresser Series B3, Дополнение к руководству по установке

Страница: 3 / 6

3
Displayed on Screen Represents Function
COMPENSATED VOLUME Compensated Volume
Displays non-compensated volume which has
been corrected to standard conditions
NON-COMPENSATED VOLUME Non-compensated Volume Displays actual non-compensated volume
LINETEMP Line Temperature Displays live line temperature
FIXED P Fixed Line Temperature Displays the line pressure as entered by the user
FLOWRATE Flow Rate
Displays uncorrected fl ow rate
(average of latest 30 seconds of captured data)
MTR INFO Meter Info Meter size and type
PROVE CV Compensated Prove Mode Allows for compensated volume accuracy testing
PROVE UV Non-compensated Prove Mode
Allows for non-compensated volume
accuracy testing
BATTVOLT Battery Voltage Displays battery voltage
REM LIFE Remaining Life
Calculated remaining battery life - shown in
months
FIRM REV Firmware Revisions
Displays the fi rmware revision that is in the
ES3 at the present time
LCD TEST LCD Test Tests all display segments
BATTCHNG Change Battery Saves data to memory and resets clock
COMPFCTR Compensation Factor
Displays the factor applied to non-compensated
volume in order to arrive at compensated volume
COMPENSATED RESIDUAL Compensated Residual
Shows extended compensated volume data
beyond the value shown in the compensated
volume screen
NON-COMPENSATED
RESIDUAL
Non-compensated Residual
Shows extended non-compensated volume data
beyond the value shown in the non-compensated
volume screen
BASE T Base Temperature Displays base temperature as entered by the user
BASE P Base Pressure Displays base pressure as entered by the user
ATMOS Atmospheric
Displays average atmospheric pressure as
entered by the user
NCVOLFLT
Non-compensated volume under
fault Displays non-compensated volume that has
accumulated since a fault occurred
3. Three to fi ve seconds after the name of the value or
the parameter appears, the screen will switch to show
you the value of the selected parameter.
4. For an explanation of the data displays, refer to
Section 2 of the “IOM:ES3 Installation Operation and
Maintenance” manual. Consult Factory for a copy of
the manual.
3. RPM Wheel
A high-speed RPM wheel is visible to the left of the digital
display as shown in Figure 3.
The RPM wheel is tied directly to the meter impellers and
is used to verify gas fl ow through the meter.
Figure 3 - Movement of the RPM wheel
indicates impeller rotation
RPM wheel
Table 1 - Scrolling sequence for ES3 screen display