49-4000231 Rev 0
9
Installation Instructions
COMPONENTS
Sink
)ODQJH
Assembly
Stopper
Sink
)ODQJH
Sink
)LEHU
Gasket
6XSSRUW)ODQJH
8SSHU0RXQWLQJ
Ring
6FUHZV
Snap Ring
'LVSRVHU
Cushion Mount
Lower Mounting
Ring
'LVKZDVKHU
'LVFKDUJH,QOHW
Gasket
Screws
Reset Button
5HDFKXSDQGXQGHU
SURWHFWLYHVKLHOGWRSUHVV
)ODQJH
'LVFKDUJH
Elbow
Hopper
PREPARATION
'LVFRQQHFWHOHFWULFDOSRZHUVXSSO\WRGLVSRVHU
2. Remove old disposer or sink flange assembly.
3. Inspect drain line. If it is heavily coated with
hardened grease and accumulations, rout out with a
plumber’s snake.
4. Remove old sealing materials and gasketing from
sink opening, both top and bottom.
NOTE:
7RSDQGERWWRPRIVLQNVXUIDFHVPXVWEHFOHDQ
dry and free of any residue to prevent leaks.
Splash
Guard
3RZHU&RUG
RQVRPH
PRGHOV
DISASSEMBLE TO INSTALL
7XUQWKHORZHUPRXQWLQJULQJFORFNZLVHXQWLOLW
releases and lift the entire hardware assembly from
the disposer.
2. Loosen the three screws from the upper mounting
ring and slide it toward the support flange.
3. Insert a flat blade screwdriver under the snap ring
and remove it.
4. Separate the upper mounting ring and support flange
from the sink flange.
Lower
Mounting
Ring
Loosen
VFUHZV
Remove
snap ring
Support
)ODQJH
