GE DigitalFlow DF868, Руководство для стартапов

Страница: 37 / 82

DigitalFlow™ Multipurpose Ultrasonic Liquid Flowmeter Startup Guide (1- and 2-Channel) 27
Chapter 2. Initial Setup
2.6.8 Fluid Type
10. Use the
[F1]-[F4]
and [

keys to select the Fluid Type . The selections for fluid type vary, depending on whether:
•
the
ENERGY OPTION
is
ON
or
OFF
; and
•
the
TRACKING WINDOW
is enabled or disabled.
Refer to Table 10 if
ENERGY OPTION
is
OFF
, or to Table 11 on page 27 if
ENERGY OPTION
is
ON
.
Note:
Some of the fluid types may require additional selections as shown in the following tables.
Table 10: Fluid Types for ENERGY OFF
Tracking Windows =
NO Additional Selections YES Additional Selections
WATER Select
NORML
or
SEA
and press
[ENT]
.
If
NORML
is selected, enter the Water
Temperature and press
[ENT]
.
W100 No additional selections required.
OIL Select
LUBE
or
CRUDE
and press
[ENT].
W260 No additional selections required.
METH No additional selections required. OIL No additional selections required.
ETH Enter the Fluid Soundspeed and press
[ENT].
OTHER Enter the Minimum Soundspeed and press
[ENT].
Then enter the Maximum Soundspeed
and press
[ENT]
LN2
No additional selections required.
FREON No additional selections required.
OTHER
Enter the Fluid Soundspeed and press
[ENT].
Table 11: Fluid Types for ENERGY ON
Tracking Windows =
NO Additional Selections YES Additional Selections
WATER Enter the Water Temperature and press
[ENT].
W260 No additional selections required.
MIXED Enter the Fluid Soundspeed and press
[ENT].
Then enter the Percentage of
Water and press
[ENT].
MIXED Enter the Percentage of Water and press
[ENT].
OTHER Enter the Fluid Soundspeed and press
[ENT]
.
OTHER Enter the Minimum Soundspeed and press
[ENT].
Then enter the Maximum Soundspeed
and press
[ENT].