Chapter 2. Initial Setup
20
DigitalFlow™ Multipurpose Ultrasonic Liquid Flowmeter Startup Guide (1- and 2-Channel)
2.5.2 2-Channel Meter
For the 2-Channel Model DF868, the information entered in the
SYSTM
submenu pertains only to the currently selected
channel.
1.
At the
User Program
screen shown, press
[F2]
to program the
SYSTM
submenu.
2.
Enter a
Channel Label
of up to 9 characters. While taking measurements, the channel label will appear on the
locator bar. Press
[ENT]
.
3.
Enter a
Channel Message
of up to 21 characters. Press
[ENT]
.
4.
Press
[F1]
to turn the Energy Option
OFF
or press
[F2]
to turn it
ON
. (The Energy Option calculates the energy of a
system based on temperatures at the supply and return points, and the flow of fluid.)
Note:
For the 2-Channel Model DF868, the
System Units
and
Totalizer
prompts, which are not required to make the
unit operational, are located in the
GLOBL
submenu. See the
Programming Manual
for details.
The remainder of the
SYSTM
submenu is identical for the 1-Channel and 2-Channel versions of the Model DF868.
Proceed to the
1- and 2-Channel Meters
section below to complete programming.
Содержание DigitalFlow DF868
Страница 2: ......
Страница 4: ...ii no content intended for this page...
Страница 80: ......
Страница 81: ......
