manualshive.com logo in svg

GE DGT-D, Инструкция по эксплуатации, Страница: 52 / 60

Поделиться
Скачать
GE DGT-D Скачать руководство пользователя страница 52

5–48

DGT DISTRIBUTED GENERATION TRIP CONTROL SYSTEM – INSTRUCTION MANUAL

CHECKING FOR NORMAL, IN-SERVICE, OPERATION

CHAPTER 5: OPERATION

Checking for normal, in-service, operation

Once a DGT Unit is configured and ready for operation please review the following 
summaries depending upon which type of DGT you are checking.  

DGT-U Normal Operation

•

The PWR (Power) LED is illuminated continuously when power is applied.

•

The LINK LED is illuminated continuously.  Note that the DGT-R that the DGT-U will 
communicate with MUST be powered on, fully configured and fully functional for the 
LINK LED to be illuminated.

•

The SERV (Service) LED is not flashing.

•

The IN LED will be lit only when energized in the event of a Trip.  If there is no Trip 
condition then this LED should be off.

•

The output LEDs, OUT-1 through OUT-7, reflect the status of the DGT-D assigned to it.  
LED OFF is DGT-D status de-energized.  LED ON is DGT-D status energized.

If any of these indications is behaving differently, please see section 6-1 for corrective 
actions.

DGT-R Normal Operation

•

The PWR (Power) LED is illuminated continuously when power is applied.

•

The LINK LED is illuminated continuously.  Note that the LED will blink when the DGT-R 
is passing data over-the-air between the DGT-U and DGT-D devices.

•

The COM1 LED blinks only when there is serial communication traffic during 
configuration.

If any of these indications are behaving differently, please see section 6-1 for corrective 
actions.

DGT-D Normal Operation

•

The PWR (Power) LED is illuminated continuously when power is applied.

•

The LINK LED is illuminated continuously.  Note that the DGT-R with which the DGT-D 
will communicate MUST be powered on, fully configured and fully functional for the 
LINK LED to be illuminated.

•

The SERV (Service) LED is not flashing.

•

The IN LED will be lit only when energized by in the event of a Trip.  If there is no Trip 
condition then this LED should be off.

•

The OUT-1 LED reflects the status of the DGT-U trip status.  LED OFF is DGT-U trip 
status de-energized.  LED ON is DGT-U trip status energized.

•

The OUT-2 LED is reserved for future use

If any of these indications are behaving differently, please see saection 6-1 for corrective 
actions.

Содержание DGT-D





























































Отзывы:

Нет отзывов