background image

GE Grid Solutions

 

D20/D200 Technical Overview

 

 

GE Information 

 

 

PRPI-019-3.00-10 

17

 

 

1.6.1.2 D200 Chassis 

Power Switch / Fuse Panel

D20EME Ethernet Memory

Expansion Module

Media Interface Card

(MIC)

Modem Slots (seven if MIC

installed, eight otherwise)

D20ME or D20ME II

Main Processors

(up to seven)

Up to four Power Supplies

10.

5 i

n

19 in.

14 i

n.

 

Figure 10  D200 Perspective Drawing 

The D200 chassis is a nine-slot VME chassis that can support up to: 

 

Seven D20 processor cards 

 

Four D.20 ports supporting up to 124 peripherals without repeaters and 480 I/O peripherals 
with repeaters 

 

49 RS-232 or RS-485 ports (seven per main processor) 

 

Two Ethernet ports 

1.6.2  Main Processor 

The design of the D20 main processor has evolved with improvements in processor performance 
and electronic packaging technology. Previous versions of the D20 main processor (D20M, 
D20M+ and D20M++), although no longer available, are still operating at many locations. The 
current versions of the D20 main processor (D20ME and D20ME II) are described below. For a 
detailed description of the main processors, see section 2.2, 

Main Processor

. 

Compatibility of the different versions of the D20/D200 main processors and chassis is listed in 
E.  

D20/D200 Main Processor Compatibility

. 

Содержание D20












































































































Отзывы: