background image

Town & Country (EPTT)

Evolve

 

LED Post Top

BEFORE YOU BEGIN

Read these instructions completely and carefully.
Save these instructions for future use.

Risk of electrical shock. Disconnect power before service 

installation, or maintenance of the product.

Installation Guide

GEH-6067

SPECIFICATIONS

GENERAL

•  Maximum weight: 18 lbs (8.2kg)
•   Intrusion Protection:
         Optical: IP65
         Electrical Enclosure: UL 1598 Wet Location Rated
•   Suggested Mounting Height: 10-18 ft. (3-5 M)
•   Effective Projected Area: 1.6 sq ft. max (0.15 sq M max)
•   Dimension: 24.5 in x  15.5in x 15.5 in

•  Luminaire is designed for outdoor lighting service.
  Do not use in areas of limited ventilation, or outside
  the rated ambient temperature range.
•   Install and maintain according to this guide.
•   Luminaire is designed to operate in ambient
  temperatures ranging from -40°C to +50°C and to
  be mounted to a vertical pole as shown.

Risk of injury. Wear safety glasses and gloves during 

 installation and servicing.

Risk of injury or damage. Unit will fall if not installed 

 properly. Follow installation instructions.

This device complies with Part 15 of the FCC Rules. Operation is 

subject to the  following two conditions:  (1) This device may not cause 

harmful  interference, and (2) this device must accept any interference 

received,  including interference that may cause undesired operation.  

This Class [A] Lighting Equipment complies with Canadian standards

ICES-005[A]/NMB-005[A].

Note: This equipment has been tested and found to comply with the 

limits for a Class A digital device, pursuant to part 15 of the FCC Rules. 

These limits are  designed to provide reasonable protection against 

harmful  interference when the equipment is operated in a  commercial 

 environment. This equipment  generates, uses, and can radiate  radio 

frequency energy and, if not installed and used in  accordance with 

the instruction manual, may cause harmful interference to radio 

 communications. Operation of this equipment in a residential area 

is likely to cause harmful  interference in which case the user will be 

required to correct the  interference at his own expense.

WARNING

WARNING

CAUTION

Содержание current Evolve LED Post Top Series













Отзывы: