GE CTT14CYT, Инструкция по использованию, уходу и установке

Страница: 4 / 40

FRESH FOOD COMPARTMENT SHELVES
Shelf supports at various levels allow you to custom-space shelves
Full-Width Shelves
(on some models)
4
Some models have a steel wire sliding shelf, a stationary tempered
glass shelf or two steel wire stationary shelves. These shelves can be
moved to another place in the fresh food compartment.
The full-width sliding shelf has
stop-locks. When placed correctly on the
shelf supports, the shelf will stop before
coming completely out of the refrigerator
and will not tilt when you place food on it or
remove food from it.
To remove the full-
width shelves.
Lift the rear of the shelf
and pull forward.
To remove a full-
width shelf when the fresh food
compartment door cannot be
opened fully… lift the rear of the
shelf, pull forward and down, tilt the
shelf and take it out.
FROZEN FOOD STORAGE COMPARTMENT SHELVES
(on some models)
Some models have an ice-tray shelf and some have a full-width step shelf.
Ice-Tray Shelf Ice Trays
(on some models)
To remove the ice-tray shelf:
Lift the left side of the shelf
off its supports, then pull the
shelf to the left to free it of the
plug supports. Pull the shelf to
the right to free the pins from
the holes in the cabinet wall. Ice trays are designed to release
ice cubes easily. Hold tray upside-
down over a container and twist
both ends to release cubes.
For only one or two ice cubes,
leave the tray right-side up, twist
both ends slightly and remove
desired number of cubes. Wash
ice trays and storage bin in
lukewarm water only. Do not
put them in an automatic dishwasher.
Plug supports
Half-Width Shelves
(on some models)
One end of the shelf rests on
a molded side-wall support;
a bracket on the other end
hooks into a track on the rear
cabinet wall.
To remove, lift the shelf up at
front, then off the support and
out of the track.
To replace, select desired shelf
height. With shelf front raised
slightly, hook the bracket’s top
lug into the track, then lower
the shelf onto the support.
NOTE: The shelf to the right of the track is
designed to hook into the right-hand slot; the
shelf to the left is designed to hook into the
left-hand slot.
2
Lift up
and out
1
Tilt up