49-55119-2
9
USING THE DISHW
ASHER
Getting started
Start Dishwasher
Start
Press the
Start
button and close the door within 4 seconds to start the cycle or begin the
Delay
Hours
countdown. The wash cycle will begin shortly after closing the door. The display will turn
off if the door remains open for two minutes. To activate the display, close and open the door or
press any button.
Interrupt or
Pause
To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash
cycle to pause. The dishwasher will beep every minute to remind you to close the door. To restart
or resume the cycle, press
Start
, and close the door within 4 seconds.
Cancel
To cancel a wash cycle, press and hold the
Start
button for 3 seconds and close door.
The dishwasher will drain, emit a beep sound, and the wash cycle light will turn OFF.
6
Cycle Indicator Lights and Sounds
Sanitized
or Cycle
Sanitized
Displayed at end of the cycle when
Wash Temp Sani
or
Sanitize Temp
has been selected and
dishwasher has met requirements for sanitization. See
Wash Temp Sani
or
Sanitize Temp
, for
complete description. Closing door or pressing any button will turn off light.
Clean
or Cycle
Complete
Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are
clean. The light will turn off when the door is opened.
Low Rinse
Aid
(on some
models)
Displayed when rinse agent is low or empty. See
Use a Rinse Agent
section. To turn indicator
off, press the
Pre-Soak
or
Steam
button 7 times within 5 seconds. Repeat this process to turn
the Low Rinse Aid indicator back on.
Cycle
Status
(on some
models)
The indicator light on the door front will change color to indicate the wash status. During the
wash cycle, the indicator light will be amber. When the wash cycle is complete, the light will
change to green.
Sounds
The dishwasher will emit a sound to indicate cycle completion, button presses, and door ajar.
Mute
To turn the dishwasher control sounds ON/OFF, press the
Heated Dry
or
Power Dry
button 7
times within 5 seconds.
Sabbath/
Door
Wake Up
Mode
(on some
models)
To turn this option ON/OFF, press and hold the
Start
and
Wash Temp
buttons for 5 seconds,
close the door and wait 3 minutes for the dishwasher to go into sleep mode. In the OFF
mode,
the control display, control sounds, and interior lights
(on some models)
will not respond to the
door opening/closing. This mode can be used when observing certain religious holidays such as
the Sabbath. To activate the control and interior lights
(on some models)
, press any button.
7
Содержание CDT835
Страница 3: ...49 55119 2 3 WELCOME Notes ...
Страница 29: ...49 55119 2 3 BIENVENUE Notes ...
Страница 55: ...49 55119 2 3 BIENVENIDO Notas ...