Installation Instructions
REMOVING THE FREEZER DRAWER
(on some models)
REMOVE THE BASKET
Open the freezer drawer until it stops.
Cut the 2 wire ties off of the basket with wire
cutters.
The freezer basket rests inside 4 tabs on the
freezer slides. Lift the basket up and out of the
4 tabs.
Tilt the front up and lift the entire basket up
and out of the drawer.
1
A
C
D
REMOVE THE BASE GRILLE
(if needed)
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still not fit
through a doorway, the base grille can be
removed.
Remove the base grille by removing the
2 Phillips-head screws.
3
The freezer drawer can be removed, if needed, to fit
through tight areas.
Read these instructions completely and carefully.
REMOVE THE DRAWER FRONT FROM
THE SLIDES
Remove the 10 hex-head screws from the door
and remove the door.
DO NOT remove the torx screws from the
rail assemblies.
Set the drawer front on a non-scratching
surface.
Push the rail assemblies back into the cabinet.
2
A
DO NOT remove
torx screws
Rail Assembly
A
A
B
C
B
25
Содержание Cafe CFCP1NIYSS
Страница 132: ...132 Notas Solucionar problemas Servicio al consumidor Operación Seguridad Instalación ...
Страница 133: ...133 Servicio al consumidor Solucionar problemas Operación Seguridad Instalación Notas GEAppliances com ...
Страница 134: ...134 Notas Solucionar problemas Servicio al consumidor Operación Seguridad Instalación ...