41
Rev H
•
Viewing the Injector Type
•
Adjusting the Cycle Times
Conditioner Cycle Times
268 Conditioner
Cycle
Range
Backwash
1-50 minutes
Fast Rinse
1-30 minutes
Refill time does not appear as this cycle time is determined by the salt
setting.
*The controller calculates the Slow Rinse default time on injector type,
system size and salt dosage. The cycle times can be adjusted for
custom applications. Please contact your AvantaPure Water
Treatment Professional before attempting to adjust the Slow Rinse
time.
This parameter displays the controller type and is preset at the factory:
268 softener, 263 filter.
The service interval feature is an option that will allow the installer to
program the unit to ask for maintenance after a programmed
duration. The feature is programmed from 0 (zero) to 99 months. When
the programmed length of time has been reached the words "CALL
DEALER FOR SERVICE" will appear in the banner display to signal the
end user that regular maintenance may be required. If it is set to 0
(zero) the function is disabled. If you wish to enable this function
program the desired service interval duration.
Содержание AvantaPure Professional 263
