GE AvantaPure Professional 263, Руководство по эксплуатации

Страница: 37 / 58

268 Conditioner Operation Type 263 Filter Operation Type
INJECTOR SELECTION* REGEN SA
BACKWASH 1 CAPACITY GAL
SLOW RINSE SELECT LANGUAGE
FAST RINSE 1 CLOCK MODE
BACKWASH 2 UNITS OF MEASURE
FAST RINSE 2 BACKWASH
OPERATION TYPE 268* FAST RINSE
SERVICE INTERVAL OPERATION TYPE 263*
CHLORINE GENERATOR SERVICE INTERVAL
CHLORINE GENERATOR
*View only.
Level II parameters will, in almost all cases, be preset to meet your
configuration needs. The predefined system number will preprogram all of
the Level II parameters to the selected default values.
Calendar Override allows the programmer to set the maximum days
between regenerations. A setting of 0 (zero) means the calendar
override is disabled. To change the calendar override, press the SET
button while the words “CALENDAR OVERRIDE" appear on the banner
display. The blinking digit can be changed to the desired numbers of
days. To lock in the parameter, press the SET button.
Setting days between regeneration to zero will cause the
system to not regenerate. This setting is used for selecting regeneration
on specific days or to use with a remote regeneration input. See below.