Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
6
ON/OFF Switch
Turns air conditioner on and off.
NOTE:
If the air conditioner is off and is then turned on while
set in a
Cool
mode, it will take approximately 3 minutes for
the compressor to start and cooling to begin.
Fan Switch
(on some models)
Use to set the fan speed to
LO
or
HI
.
Mode/Temp Control
Use to set the air conditioner to the
Fan Only
or a
Cool
mode.
Fan Only Mode
Use
Fan Only
at
HI
or
LO Fan
to provide air
circulation and filtering without cooling.
Cool Mode
Use a
Cool
setting with
HI
or
LO Fan
for cooling.
Turn the knob clockwise, toward the larger blue
area, for the indoor area to become cooler. Turn
the knob counterclockwise, toward the smaller blue
area, for the indoor air to become warmer.
The Mode/Temp control is used to maintain the
room temperature. When set in a
Cool
mode, the
compressor will cycle on and off to keep the room
at the same level of comfort.
Cooling Descriptions
For Normal Cooling—
Select a
Cool
mode with the
Mode/Temp knob set at the midpoint.
For Maximum Cooling—
Select a
Cool
mode with
the Mode/Temp knob set toward the larger
blue area.
For Quieter & Nighttime Cooling—
Select a
Cool
mode with
the Mode/Temp knob set toward the smaller blue area.
NOTE:
If you move the Mode/Temp control knob from a
Cool
setting to the
Fan On
setting, wait at least 3 minutes
before switching back to a
Cool
setting.
About the controls on the air conditioner—models with control knob(s).
Features and appearance may vary.
Controls
(on models so equipped)
Controls
(on models so equipped)
Mode Control
Hi Cool, Med Cool
and
Low Cool
provide cooling
with different fan speeds.
Low Fan
or
Hi Fan
provides air circulation and
filtering without cooling.
Thermostat Control
The thermostat control is used to maintain the
room temperature. The compressor will cycle on
and off to keep the room at the same level of
comfort. When you turn the knob to a higher
number, the indoor air will become cooler. Turn
the knob to a lower number and the indoor air
will become warmer.
NOTE:
If you move the switch from a cool setting to
OFF
or
to a fan setting, wait at least 3 minutes before switching back to a
cool setting.
Cooling Descriptions
For Normal Cooling
–Select
Hi Cool
or
Med Cool
with the
thermostat control at midpoint.
For Maximum Cooling
–Select
Hi Cool
with the thermostat
control at the highest number available on your knob.
For Quieter & Nighttime Cooling
–Select
Low Cool
with the
thermostat control at midpoint.
