GE AquaTrans AT600, Руководство пользователя

Страница: 92 / 216

Chapter 4. Initial Setup and Programming
80 AquaTrans™ AT600 User’s Manual
4.7.6 Programming the Transducer when Wetted selected
4.7.6.1 Entering a Standard Transducer
Select
Transducer
and press [√]. The following screen opens.
Select
STD
and press [√]. A screen similar to the following opens.
Press
[

]
again, and a screen similar to the following opens.
Use the [

] or [

] key to select a specific digit and change that digit as
required. After all digits are correct, press
[

] t
o save. Then, press [

] to
return to the previous screen.
Note:
The available AT600 standard transducers are listed in Table 6
below.
Table 6: Standard Wetted Transducer Types
Transducer Number Transducer Type
40
WT-1/1P-10-00-NT
44
WT-1/1P-05-00-NT
71
PA-36-1P/WT-1/1P-10-00
72
PA-36-1P/WT-1/1P-10-00-HL
73
PA-PV-1P or F/WT-1/1P-10-EW
74
PA-36-1P-EW/WT-1/1P-10
75
PA-36-1P-EW/WT-1/1P-10-00-HL
Sensor Setup
Meter Setup
Pipe
Transducer
Mounting Type
Transducer
SPEC
STD
SPEC
STD
SPEC
STD
0
STD
0
]MOVE
]UNDO [ ]SAVE
]
]
]MODF [