GE AquaTrans AT600, Руководство пользователя

Страница: 54 / 216

Chapter 4. Initial Setup and Programming
42 AquaTrans™ AT600 User’s Manual
4.4.4.1 Program Review
The
Program Review
menu requires no user password. However, it provides view-only access to the
information. To change any setting or parameter, you must enter the
Program Menu
by entering a valid
password.
4.4.4.2 Program
IMPORTANT:
When you enter
Program
(configure) mode, measurements stop and the output goes to error level.
To enter the
Programming
menu, on the
Display
menu use the arrow keys
to highlight
Program
and press [√]. The following screen opens.
Use the [

] or [

] key to select a specific digit, then use the [

] or [

] key
to change that digit as required. After all digits are correct, press
[

] t
o
open the
User Preference
screen.
Note:
The default password is
1111
.
Display
Display Format
Program
Program Review
Keypad Lockout
Enter the password
9999
]MOVE
]UNDO [ ]SAVE
]
]
]
]MODF