Arming options
The system provides the arming options described below.
Quick arm
This option lets you arm your system without using an access code. You will still need
to enter an access code to disarm the system. Your dealer/installer can turn this
option on or off for you. See “System options” on page 28 to see if this feature is
available to you.
To use the quick arm option:
1. To arm to level 2 with quick arm enabled, press Arm once.
— or —
To arm to level 3 with quick arm enabled, press Arm twice.
Keychain touchpad arming
Your installer can set up your keychain touchpad to arm the system in one of the
following ways:
• Press Lock to arm the system directly to level 3 with no delay. Using this method,
you would not be able to arm to level 2 with your keychain touchpad.
• Press Lock to increase the arming level each time it is pressed (level 1 to level 2,
level 2 to level 3). The exit delay time begins.
Quick exit
This option is useful when you want to quickly exit and reenter a door without
disarming your system.
To use the quick exit option:
1. When the system is armed to level 2 or 3, press Quick Exit.
The panel displays
QUICK 120
, and begins a two-minute countdown.
2. Open the door and exit.
3. Reenter the door within two minutes and close the door.
The system rearms after the two-minute countdown.
12
Allegro Control Panel User Manual
