4
About the controls on the air conditioner.
Controls
Power Pad
Turns air conditioner on and off. When
turned on, the display will show the room
temperature.
Display
Shows the room temperature or time
remaining on the Delay timer. Shows the
Set
temperature while setting the temperature in
Cool
or
Energy Saver
modes. The
Set
light will
turn on while setting.
NOTE:
The display will change to show the
room temperature after settings have been
made. To recall the
Set
temperature, press the
Temp Increase
▲
or
Decrease
▼
pads.
Temp Increase
▲
/ Decrease
▼
Pads
Use to set temperature when in
Cool
or
Energy
Saver
mode. The
Set
light will turn on while
setting. Hold down both the up and down
pads for 5 seconds to change the display
between Fahrenheit and Celsius.
Delay Timer Increase
▲
/ Decrease
▼
Pads
Each touch of the
Increase
▲
/ Decrease
▼
pads on the unit or on the remote control will
set the delay time when using the
Delay 1–24hr
timer. The
Set
light will turn on while setting.
Fan Speed Pad
Use to set the fan speed to
Low, Med, High
or
Auto
on the unit
. NOTE:
On the remote
control, use the
Fan
button to set the fan
speeds to
Low
,
Med
,
High
or
Auto
.
Mode Pad
Use to set the air conditioner to
Cool
,
Energy
Saver
or
Fan
mode.
Delay Pads
Delay ON—
When the air conditioner is off, it
can be set to automatically come on in 1 to 24
hours at its previous mode and fan settings.
Delay OFF—
When the air conditioner is on,
it can be set to automatically turn off in 1 to
24 hours.
How to set:
Press the
Delay 1–24hr
pad on the unit or on
the remote control. Each touch of the
Increase
▲
/ Decrease
▼
pads on the unit or on the
remote control will set the timer in 1/2-hour
intervals until the time reaches 10 hours; then
it will increase in 1-hour intervals. The
Set
light will turn on while setting.
To review the remaining time on the
Delay
1–24hr
timer, press the
Delay 1–24hr
pad on
the unit or on the remote control. Use the
Increase
▲
/ Decrease
▼
pads on the unit or
on the remote control to set a new time if
desired.
To cancel the timer,
press the
Delay 1–24hr
pad
until the light on the
Delay 1–24hr
pad goes off.
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Delay timer and
temperature set
Decrease/Increase
Remote Control
Unit power on/off
Air Conditioner Controls
Safety Instructions
Operating Instructions
Care and Cleaning
Installation Instructions
Tr
oubleshooting T
ips
Consumer Support
Light indicates the unit
is in temperature or
delay time Set mode.
Light indicates the
delay timer is set.
(on some models)
NOTE:
The display always shows the
room temperature except when setting
the Set temperature or the Delay timer.
Delay 1–24hr
Mode select
Auto Fan on/off and
Decrease/Increase
