GE AJ806L, Инструкция по использованию, уходу и установке

Страница: 11 / 16

the Chassis.
models and
models are shipped with chassis
and front grille only.)
1.
Remove chassis from cabinet.
2. Loosen the screw (A),
then turn the chassis plate
90° downward as shown.
Chassis
Locking
Plate
Models
2. Mount the Rear Grille.
1. While holding the grille at
angle, insert it into clips at the top of
and push it toward the unit.
Keep slight upward pressure on the
grille until it fits flush with the
bottom of the cabinet.
Clip Clip
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . .+-’’’ ’’”
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. .. . . . . ..-’ -’’’’”
. .
. . . . . .
. . . . . . . . . . “ “
.
—
. . . . . . . .
. . . . . . .
1
Grille (Long)
2.
Secure the bottom of the grille
with 2 long grille screws provided
with the grille.
3. Loosen the ground screw (B),
then remove the ground wire. Save
the ground wire for reinstallation
later.
Grille Screws (Short)
4.
Pull the bottom corners of the
and slide it out from the
Note: The rear grille may be
installed from the room side with 2
short screws provided with the grille.
3. Instill Curtains.
1. Install the top mounting rail onto
the top of the cabinet with 4 B
screws.
Top
Mounting
Rail
Side
Cabinet Reinforcement
2.
Secure the sill channel to both
sides of the cabinet with 4 B
screws—2 on each side.
Sill Channel
3.
Insert the left and right extension
frames into the top mounting rail
and the sill channel.
Room
4.
Secure the curtains in the
extension frames to both sides of
the cabinet with 6 Type B
3 on each side.
(continued
11