12
49-5000634 Rev. 1
Installation Instructions
INST
ALLA
TION INSTRUCTIONS
4. PREPARE THE AIR
CONDITIONER
Adjusting the Chase-Way
• Measure window depth from interior to exterior.
8VHWKHWDEOHIURP6HFWLRQWRGHWHUPLQHWKH
corresponding chase-way position.
• Remove 4 locking screws that hold the chase-way in
place.
• Pull chase-way to position needed based on your
window depth.
• Place tab of side panel bracket into slot on
chase-way to hold position.
• Install the 4 screws (2 on each side) back into place
to lock in chase-way.
Locking
Screws (4)
PULL
PULL
3.
WALL REQUIREMENTS
• Measure your window depth and use the table
below to determine the necessary chase-way
position.
Window Depth
Chase-Way Position
Less than 7.75”
Closed*
7.75” - 9.75”
1
9.75” - 11.75”
2
11.75” - 13.75”
3
* The unit comes in the closed position. If no
adjustment is necessary, skip to Section 5.
Chase-Way
Outside
Inside
Sill
Stool
Depth
Locking
Screws (4)
Side Panel
Bracket
Locator Slot
Place tab into slot
to hold desired
position.
Depth
Содержание AHTT06
Страница 20: ...20 49 5000634 Rev 1 Notes ...
Страница 42: ...20 49 5000634 Rev 1 Notas ...