![background image](http://html1.mh-extra.com/html/ge/af-650-gp-series/af-650-gp-series_programming-manual_3943319104.webp)
EN-14 Link Duplex
Option:
Function:
Forces the duplex for each port to Full or Half
duplex. If
EN-12 Auto Negotiation
is set to:
[ON], this parameter is read only.
[0]
Half Duplex
[1]
*
Full Duplex
EN-20 Control Instance
Range:
Function:
[None, 20, 21, 23,
100, 101, 103]
Read only. Displays the connection to
the master. In Ethernet/IP: If no CIP
connection is present, “None” is
displayed.
EN-21 Process Data Config Write
Range:
Function:
[[0 - 9] PCD read 0 - 9] Configuration of readable process
data.
EN-22 Process Data Config Read
Range:
Function:
[[0 - 9] PCD read 0 - 9] Configuration of readable process
data.
EN-28 Store Data Values
Option:
Function:
This parameter activates a function that stores
all parameter values in the non-volatile
memory (EEPROM) thus retaining parameter
values at power-down.
The parameter returns to “Off”.
[0]
*
Off
The store function is inactive.
[1]
Store All
set-ups
All parameter value will be stored in the non-
volatile memory, in all four setups.
EN-29 Store Always
Option:
Function:
Activates function that always stores received
parameter data in non-volatile memory (EEPROM).
[0]
*
Off
[1]
On
EN-30 Warning parameter
Range:
Function:
[0000–
FFFF hex]
Read only. Displays the Ethernet/IP specific 16-bit
Status-word.
Bit
Description
0
Owned
1
Not used
2
Configured
3
Not used
4
Not used
5
Not used
6
Not used
7
Not used
8
Minor recoverable fault
9
Minor unrecoverable fault
10
Major recoverable fault
11
Major unrecoverable fault
12
Not used
13
Not used
14
Not used
15
Not used
Table 3.27
EN-31 Net Reference
Option:
Function:
Read only. Displays the reference source in Instance
21/71.
[0]
*
Off
Reference from the network is not active.
[1]
On
Reference from the network is active.
EN-32 Net Control
Option:
Function:
Read only. Displays the control source in Instance
21/71.
[0]
*
Off
Control via the network is not active.
[1]
On
Control via the network is active
EN-33 CIP Revision
Option:
Function:
Read only. Displays the CIP-version of
the option software.
[0] Major version (00 - 99)
[1] Minor version (00-99)
EN-34 CIP Product Code
Range:
Function:
1100 (AF-650 GP) 1110
(AF-650 GP)
*
[0–9999] Read only. Displays the CIP
product code.
Parameter Descriptions
AF-650 GP Programming Guide
DET-618C
103
3
3