•
the motor is coasted
OR
•
the set-ups between which the shift happens are linked to each other (see par. 0-12,
Linked Set-ups
).
If changing between set-ups that are not linked, the change will not happen before motor is coasted.
NB!
The motor is only considered stopped when it is coasted.
[1 ]
*
Set-up 1
Set-up 1
is active.
[2]
Set-up 2
Set-up 2
is active.
[9]
Multi Set-up
Select the active set-up via digital input and/or bus, see par. 5-1* choice [23].
0-11 Edit Set-up
Option:
Function:
The
Edit Set-up
is for updating parameters in the frequency converter from either Keypad or bus. It can be identical
or different from the
Active Set-up
.
All set-ups can be edited during operation, independently of the active set-up.
[1 ]
*
Set-up 1
Update parameters in
Set-up 1
.
[2]
Set-up 2
Update parameters in
Set-up 2
.
[9]
Active Set-up
Update parameters in set-up selected as
Active Set-up
(see par. 0-10).
0-12 Link Set-ups
Option:
Function:
The link ensures synchronizing of the “not changeable during operation” parameter values enabling shift from one
set-up to another during operation.
If the set-ups are not linked, a change between them is not possible while the motor is running. Thus the set-up change
does not occur until the motor is coasted.
[0]
Not linked
Leaves parameters unchanged in both set-ups and cannot be changed while motor runs.
[1 ]
*
Linked
Copy parameters “not changeable during operation” parameter values into presently selected
Edit Set-up
.
NB!
This parameter cannot be changed while motor runs.
4.1.2. 0-31 Custom Readout Min Scale
0-31 Custom Readout Min Scale
Range:
Function:
0.00
*
[0.00 – 9999.00 ]
It is possible to create a customized readout related to the output frequency of the unit. The value entered in par. 0-31
will be shown at 0 Hz. The readout can be shown in the LCP display when in Status Mode or it can be read in par. 16-09
4.1.3. 0-32 Custom Readout Max Scale
0-32 Custom Readout Max Scale
Range:
Function:
100.0
*
[0.00 – 9999.00]
It is possible to create a customized readout related to the output frequency of the unit. The value entered in par. 0-32
will be shown at the frequency programmed in par. 4-14 Motor Speed High Limit. The readout can be shown in the LCP
display when in Status Mode or it can be read in par. 16-09
4.1.4. 0-4* Keypad
The frequency converter can operate in the following three modes:
Hand
,
Off
and
Auto
.
Hand:
The frequency converter is locally operated and does not allow any remote control. By activating Hand a start signal is given.
OFF:
The frequency converter stops with a normal stop ramp. When Off is chosen the frequency converter can only be started by pressing either Hand or Auto
on the Keypad.
AF-60 LP™ Micro Drive Programming Guide
12
4
Содержание AF-60 LP
Страница 63: ...AF 60 LP Micro Drive Programming Guide 62 5...
