![background image](http://html1.mh-extra.com/html/ge/aen10-series/aen10-series_owners-manual-and-installation-instructions_4187509004.webp)
4
About the controls on the air conditioner
Controls
Power Pad
Turns air conditioner on and off. When turned
on, the display will show the room temperature.
Display
Shows the room temperature or time remaining
on the Delay timer. Shows the Set temperature
while setting the temperature in
Cool
or
Energy
Saver
modes. The
Set
light will turn on while
setting.
NOTE:
The display will change to show the room
temperature after settings have been made.
To recall the
Set
temperature, press the
Temp
Increase
c
or
Decrease
d
pads.
Temp Increase
c
/Decrease
d
Pads
Use to set temperature when in Cool or Energy
Saver mode. The Set light will turn on while
setting.
Delay Timer Increase
c
(+) /Decrease
d
(–)
Pads
Each touch of the Increase
c
/ Decrease
d
pads
on the unit or the
Increase
+
/ Decrease
–
pads
on the remote control will set the delay time
when using the
Delay 1–24hr
timer (
+
). The
Set
light will turn on while setting.
Fan Speed Pads
Use to set the fan speed to
Low, Med, High
or
Auto
on the unit.
NOTE:
On the remote
control, use the fan speed
Increase
+
/
Decrease
–
pads to set the fan speeds to
Low,
Med
or
High
. Use the
Auto
pad to turn
Auto
fan on.
Mode Pad
Use to set the air conditioner to
Cool, Energ
y
Saver
or
Fan Only
mode.
Delay Pads
Delay ON
³:KHQWKHDLUFRQGLWLRQHULVRIILWFDQ
be set to automatically come on in 1 to 24 hours
at its previous mode and fan settings.
Delay OFF
³:KHQWKHDLUFRQGLWLRQHULVRQ
it can be set to automatically turn off in 1 to
24 hours.
How to set:
Press the
Delay 1–24hr
pad on the unit or the
+
pad on the remote control. Each touch of the
Increase
c
/ Decrease
d
pads on the unit or the
Increase
+
/ Decrease
–
pads on the remote
control will set the timer in 1-hour intervals. The
Set
light will turn on while setting.
To review the remaining time on the Delay
1–24hr timer, press the Delay 1–24hr pad on the
unit or the
+
pad on the remote control. Use the
Increase
c
/ Decrease
d
pads on the unit or the
Increase
+
/ Decrease
–
pads on the remote
control to set a new time if desired.
To cancel the timer,
press the
Delay
1–24hr
pad until the light on the
Delay 1–24hr
pad goes off.
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
The display always shows
the room temperature
except when setting the
Set temperature or the
Delay timer.
Air Conditioner Controls
Light indicates the delay timer is set.
Light indicates the unit
is in the temperature or
delay time Set mode.
In the case of a power outage or interruption, the
unit will automatically re-start in the settings last
used after the power is restored. If the Delay 1–24hr
feature was set, it will resume countdown. You may
need to set a new time if desired.
Power Outage Recovery Feature
Remote Control
Fan
Fan
Содержание AEN10 Series
