manualshive.com logo in svg

GE ADTS542F, Руководство пользователя

Поделиться
Скачать
GE ADTS542F Скачать руководство пользователя страница 111

ADTS TOUCH-ER (E

XTENDED

 R

ANGE

) B

LUETOOTH

®

K0553 Revision D

102

[EN] English

ADTS TOUCH-ER (Extended Range) Bluetooth®

On large aircraft, particularly if situated out in the open away from buildings or other reflective 

surfaces, Bluetooth® link performance can be impaired. The ADTS TOUCH-ER has been devel-
oped for these instances.

This unit is the same as the standard ADTS TOUCH in every way with the exception of the Blue-

tooth® antenna, which is provided as a removable antenna connected to an external RF 

connector on the base of the unit.

Figure 3-44: External Bluetooth® Antenna

The ADTS TOUCH-ER is provided with both a standard external antenna, and also an antenna 
extension kit, which enables the antenna to be mounted directly on the inside of the cockpit 

window using a suction cup assembly, and then connected to the RF connector on the body of 

the ADTS TOUCH-ER using a cable. Both options allow the operator to move freely around the 
cockpit, and the most appropriate option should be chosen by the operator at time of testing on 

the day and aircraft concerned.

Содержание ADTS542F


























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды