12
Pr oblem
Indicator Light not
blinking when you
press any key
The RM94905 does
not operate your
device
Not performing com-
mands properly
Problems program-
ming a TV/VCR Combo
Unit
VCR not recording
Channel up and down
do not function on an
RCA TV
Problems changing
channels
No response after
pressing a key
Tr ouble Shooting
Solution
A) Replace the batteries
(with fresh, new AAA
Alkaline batteries).
B) Check that batteries
are properly installed.
A) Try all the codes
listed for your brand.
B) Try the Code Search
method (page 11).
Start Code Search over again
to locate the proper code.
Try the VCR code for your
brand. Some combo units,
however, may require both a
TV and a VCR code for full
operation.
As a safety feature on your
remote, you must press the
REC button twice.
Due to some designs, the
original remote will only per -
form these functions.
If your original remote
required ENTER after a chan-
nel, press ENTER after you
select a
channel.
A) Make sure you have
new batteries, and you
are aiming your
remote at your devices.
B) Check that batteries are
properly installed. See
page 3.
94901 Revised Size 1/29/02 2/25/02 4:16 PM Page 13
