GE 82-POE, Руководство пользователя

Страница: 147 / 226

Chapter 5: Console Management
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 143
NOTE: If you are not familiar with console command or the related parameter, enter
"help" anytime in console to get the help description.
You can change these settings, if desired, after you log on. This management method
is often preferred because you can remain connected and monitor the system during
system reboots. Also, certain error messages are sent to the serial port, regardless of
the interface through which the associated action was initiated. A Macintosh or PC
attachment can use any terminal-emulation program for connecting to the terminal
serial port. A workstation attachment under UNIX can use an emulator such as TIP.
Commands Level
The following table lists the CLI commands and description.
Modes Access Method Prompt Exit Method About This Model
User EXEC
Begin a session with
your switch.
switch>
Enter logout or
quit.
The user commands
available at the user
level are a subset of
those available at the
privileged level.
Use this mode to:
• Perform basic tests.
• Display system
information.
Privileged
EXEC
Enter the enable
command while in
User EXEC mode.
switch#
Enter disable to
exit.
The privileged
command is the
advanced mode.
Use this mode to
• Display advanced
function status
• Save configuration
Global
Configuration
Enter the configure
command while in
privileged EXEC
mode.
switch
(config)#
To exit to
privileged EXEC
mode, enter exit
or end
Use this mode to
configure those
parameters that are
going to be applied to
your switch.