Figure #6
4. Close the water tank lid and place the empty carafe onto the warming plate.
5. Refer to “How to Set the Grind Function“ on page 6 and set the Grinder on.
6. Refer to “How to 1-4 cup and T.S.B “ on page 7 to turn on this feature if desired.
7. Press the “ auto/on/off” button until the LCD displays “on”. The coffee maker
will automatically begin brewing when grinding is complete. When brewing is complete
the coffee maker will beep three times. The coffee maker will keep coffee warm and
automatically turn off after two hours. Five beeps will sound to signal the end of the two
hour brewing/warming cycle.
Note
: During operation, you can take out carafe, pour and serve at any time. the
appliance will stop dripping automatically. replace carafe within 30 seconds to avoid filter
basket overfill.
8. To make another pot of coffee, turn off the coffee maker. Clean the unit per
instruction “Cleaning the Grinding and Brewing unit”. Repeat steps 1 through 7.
9. Be sure to turn off your coffee maker when no longer in use. Press the “auto/on/off“
button until the unit is off, then unplug the coffee maker.
Program Brew Coffee with Fresh Beans
1. Set the program time, see “ How to set the programmed time”.
2. Follow step 1 through 6 in the “Brew Coffee with Fresh Beans “
3. Press and hold “auto/on/off” button until the “auto” indicator is displayed on the
LCD. The coffee maker is now set to automatically grind and brew coffee at the pre-set time.
When brewing is complete, the coffee maker will beep three times. The coffee maker will
keep coffee warm and automatically turn off after two hours. Five beeps will sound to signal
the end of the two hour brewing/warming cycle.
OPERATING INSTRUCTIONS
