GE 30524 Скачать руководство пользователя

Страница: 77 / 87

Appendix

FCC Parts 15, 68 and ACTA

This equipment is in compliance with parts 15 and 68, FCC Rules and

Regulations and the Technical Requirements for Telephone Terminal Equipment

published by ACTA.
On the bottom of this equipment is a label indicating, among other information,

the US number and Ringer Equivalence Number (REN) for the equipment. You

must, upon request, provide this information to your telephone company.
The REN is useful in determining the number of devices you may connect to

your telephone line and still have all of these devices ring when your telephone

number is called. In most (but not all) areas, the sum of the RENs of all devices

connected to one line should not exceed 5.
A plug and jack used to connect this equipment to the premises wiring

and telephone network must comply with the applicable FCC Part 68 rules

and requirements adopted by the ACTA. A compliant telephone cord and

modular plug is provided with this product. It is designed to be connected to a

compatible modular jack that is also compliant. See installation instructions for

details.
This equipment is not intended to be used with Party Lines. If your home has

specially wired alarm equipment connected to the telephone line, ensure the

installation of this product does not disable your alarm equipment. If you have

questions about what will disable alarm equipment, consult your telephone

company or a qualified installer.

If this equipment is malfunctioning, it should be unplugged from the modular

jack until the problem is corrected. Repairs to this equipment can only be

made by the manufacturer or its authorized agents. For information on repair

procedures, follow the instructions provided with the limited warranty. Should

your equipment cause trouble on your line which may harm the telephone

network, the telephone company shall, where practicable, notify you that

temporary discontinuance of service may be required. Where prior notice

is not practical and the circumstances warrant such action, the telephone

company may temporarily discontinue service immediately. In case of such

temporary discontinuance, the telephone company must: (1) promptly notify

you of such temporary discontinuance; (2) afford you the opportunity to correct

the situation; and (3) inform you of your right to bring a complaint to the

Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules

and Regulations.
The telephone company may make changes in its communications facilities,

Содержание 30524
























































































Результаты поиска

Содержание 30524

Отзывы:

Похожие инструкции для 30524

Бренды по названию

Популярные бренды

GE 30524, Руководство пользователя

Результаты поиска

Содержание 30524

Отзывы:

Похожие инструкции для 30524

Бренды по названию

Популярные бренды