background image

Appendix

70

13. Do not expose the product to extreme temperatures such as areas 

near a hot radiator, stove or in a hot car. Do not place product upon 

other consumer electronic products such as; computer monitors, power 

amplifiers, etc.  

14. Do not place lighted candles, cigarettes, cigars, etc., on or near the 

telephone.  

15. Never touch uninsulated telephone wires or terminals unless the telephone 

line has been disconnected at the network interface.

16. Never install or modify telephone wiring during a lightning storm.  
17. Never install jacks or telephones in wet locations.   
18. Use caution when installing or modifying telephone lines to prevent 

electrical shock and/or fire.

19. Under the following conditions, unplug this product from the wall outlet and 

refer servicing to qualified service personnel:  

 

A.  The power supply cord or plug is damaged or frayed.  

 

B.  The product has been exposed to rain or water. 

 

C.  The product does not operate normally by following the operating    

 instructions.

 

D.  The product’s cabinet has been damaged.  

 

E.  The product exhibits a distinct change in performance. 

20. Avoid using a telephone during an electrical-storm. There may be a remote 

risk of electric shock from lightning.  

21. Do not use the telephone to report a gas leak in the vicinity of the leak.   
22. Do not place this product on an unstable cart, stand, or table. The product 

may fall, causing serious damage to the product. 

23. Only use attachments/accessories specified by the manufacturer. 

24. Unplug this apparatus during lightning storms or when unused for long 

periods of time.

IF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING 

ADDITIONAL PRECAUTIONS SHOULD BE OBSERVED:

1.   Use only the type and size battery(ies) specified in the user’s manual.  

2.   Do not use this product if the battery door is removed or missing.

Содержание 30524
























































































Отзывы: