manualshive.com logo in svg

GE 28851 Series, Руководство пользователя

Поделиться
Скачать
GE 28851 Series Скачать руководство пользователя страница 46

6

Erasing Messages

You may erase messages in the following three ways:
To erase a message while it is playing
1.  Press and release 

PLAY/STOP button.

.  Press the 

repeat and skip buttons to select and play the message you want to 

erase.

.  Press the 

delete button, the current message is erased, and the next 

message plays.

To erase all previously played Messages in a mailbox
1.  Make sure the phone is 

OFF (not in TALK mode)

.  Press and hold the 

delete button until “

ALL OLD MESSAGES ERASED

” is 

announced. 

To erase a message from the handset: 
1.   Press the 

mute/menu OK/program button to go to the main menu.

.   Press the 

CALLER ID-VOLUME (

6 

or

 5

) button to scroll to 

ANSWERER

.

.   Press the 

mute/menu OK/program button to enter the menu, press the CALLER 

ID-VOLUME (

6 

or

 5

) to select 

HANDSET ACCESS submenu. 

.   Press the 

mute/menu OK/program button to access the answering system. The 

screen displays 

ANSWERER REMOTE ACCESS

. 

5.  Press the 

play/stop (key ) on the handset.

6.  Press the 

erase (key 0) on the handset to erase a message during playback.

NOTE: Erased messages cannot be restored.

Содержание 28851 Series

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды