GE 28851 Series Скачать руководство пользователя страница 31

Страница: 31 / 64

. Select

2NO

, if you do not want to de-register.

5. If you select

1YES

, press the

mute/menu OK/program button and

MOVE NEAR TO

BASE

displays for seconds, then

CONFIRM? 1YES 2NO

appears in the display.

6. Press the touch-tone pad to select

1YES

2NO

, or use the

CALLER ID-VOLUME

(

) button to scroll to

1YES

2NO

7. If you select YES, press the

mute/menu OK/program button to confirm.

DE-

The

screen displays

REGISTER...

. You will hear a confirmation tone. Then the screen

displays

DEREGISTERED

to confirm the handset is deregistered.

NOTE: When you complete the de-registration process, The screen

displays

HANDSET NEEDS REGISTRATION

. To use the handset, you

MUST re-register the handset using the Registration process.

Global De-registration

If one or more handsets becomes lost, you should de-register all handsets to ensure
proper system operation.

WARNING: It is not recommended that a handset be de-

registered unless absolutely necessary because once a handset

is de-registered, that handset’s telephone features cannot be

used until the handset is re-registered.

1. Disconnect power from the base by pulling the plug out of the back of the unit.
. Press and hold the

find button and while holding the find button reconnect the

power.

. Continue to hold the

find button until the charge/in use voicemail light flashes

rapidly.

. Release the

find button.

5. Press and release the

find button on the base once. All handsets are de-registered

and the screen displays

HANDSET NEEDS REGISTRATION

Default Setting

As you become familiar with this system, you may prefer to use the system’s original
settings. Follow the steps below to return to the factory default settings.
From the Handset Setup Menu:
1. Press the

CALLER ID-VOLUME (

) button to scroll to the

DEFAULT SETTING

sub-menu.

Содержание 28851 Series

































































Результаты поиска

Содержание 28851 Series

Отзывы:

Бренды по названию

Популярные бренды

GE 28851 Series, Руководство пользователя

Результаты поиска

Содержание 28851 Series

Отзывы:

Бренды по названию

Популярные бренды