Deleting All CID Records
1. Make sure the phone is
OFF
(not in TALK mode).
. Use the CALLER ID-VOLUME (
6
or
5
) button to display any Caller ID record.
. Press and hold the delete/intercom/conf button until
DELETE ALL?
shows in the
display.
. Press delete/intercom/conf button to erase all of the current CID records. The
display shows
DELETED
followed by
NO CALLS
.
NOTE: Press the END/cancel button to return to the standby mode
without deleting any CID records.
Belt Clip and Optional Headset
Connecting the Belt Clip
1. To attach the belt clip, insert the sides of the belt clip into the slots on each side of
the handset.
. Snap the ends of the belt clip into place.
Connecting an Optional Headset to the Handset
Each handset can be used with an optional headset hands free operation.
1. Connect the headset to the headset jack on the side of the handset.
The handset receiver and microphone are disabled when the headset is
connected.
. Adjust the headset to rest comfortably on top of your head and over your ear.
Move the microphone to approximately two to three inches from your mouth.
. Press the TALK button to answer a call or make calls using the headset.
. To return to normal operation, unplug the headset from the jack.
