1
NOTE: While in room monitoring mode, the handsets will emit an
alert tone approximately every 5 seconds if there is an incoming
call. You may press the SPEAKER button to quit room monitor and
answer the call.
NOTE: While in room monitoring mode, the originating handset can be
switched to monitor by handset earpiece by pressing the TALK button once.
Switch back to speakerphone by pressing the SPEAKER button once.
NOTE: Press the END/cancel button on the handset to exit room
monitor mode.
Set Alarm Clock
1. Make sure your phone is
OFF
(not in TALK mode).
. Press the mute/menu OK button to go to the main menu.
. Press CALLER ID-VOLUME (
6
or
5
) button to scroll to
ALARM
.
. Press mute/menu OK button to enter the submenu,
ALARM 1ON 2OFF
shows on
the display.
5. Use the touch-tone pad to enter the selection, or use the CALLER ID-VOLUME
(
6
or
5
) button to scroll to
1ON
or
2OFF
.
6. If you select
ON
, press the mute/menu OK button to confirm and advance
Set
Alarm Time
sub-menu.
7. Use the number keys to enter the time, then use number key to select
AM
and
number key 7 to select
PM
.
8. Press the mute/menu OK button to confirm and advance
Set Cycle Time
sub-menu.
9. Use the CALLER ID-VOLUME (
6
or
5
) button to select
Once
or
Daily
. The default
setting is
Once
.
10. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone.
NOTE: If you select Daily, the system will follow the current time
setting to turn on the alarm.