9
Handset Setup
6. Place the handsets in the charge cradles.
The blue CHARGE indicator turns on,
verifying the batteries are charging.
Allow handset to charge for 1 hours prior
to first use. If you do not properly charge
the handset, battery performance is
compromised.
Handset Registration
For accessory handsets (without Base unit),
an auto-registration mechanism is available
so the unregistered accessory handset can be
automatically registered without the need of
entering a PIN code.
On the base:
1. Put the base into subscription mode, by
pressing and holding the PAGE button for at
least 8 seconds.
2. The DECT indicator light starts flashing. It
is now ready to be associated with a new
handset. This registration mode lasts 90
seconds after pressing the button. Once the
subscription is done, the base LED flashing
is switched off.
On the handset:
1. Make sure your phone is
OFF
(not in talk
mode).
2. Press
, navigate to the
Registration
menu, press
to enter.
3. Use
or
to scroll to
Register Handset
.
NOTE
: When a handset is
associated with a base,
a number is given to the
handset by the base.
This number is displayed
on the handset after the
name and must be used
for internal calls.
NOTE
: A handset can be
registered to only one
base.
NOTE
: When a handset is
associated with a base,
a number is given to the
handset by the base.
This number is displayed
on the handset after the
name and must be used
for internal calls.
NOTE
: A handset can be
registered to only one
base.
