GE 28203 Скачать руководство пользователя страница 57

Страница: 57 / 64

Handset does not ring

• Make sure the handset ringer is programmed to

• Move closer to the base. The handset may be out of range.
• You may have too many extension phones on your line. Try unplugging

some phones.

• Check for a dial tone.

You experience static, noise, or fading in and out

• Move closer to base. The handset might be out of range.
• Relocate the base. Make sure base is not plugged into an electrical

outlet with another household appliance.

• Charge the battery.

Unit beeps

• Place handset in base for 0 seconds; if it still beeps, charge battery for

16 hours.

•  Clean the charging contacts on handset and base with a soft cloth.
•  See solutions for “No dial tone.”
•  Replace the battery.

Memory Dialing doesn’t work

• Make sure you programmed the memory location keys correctly.
• Did you follow proper dialing sequence?

Unit locks up and there is no communication between the handset and base

• Unplug the power adaptor from the electrical outlet and the back of the

base. Remove the handset battery. Wait for 0 seconds and plug the

power adaptor back into the base and electrical outlet. Reconnect the

battery and charge for 16 hours.

Содержание 28203

































































Результаты поиска

Содержание 28203

Отзывы:

Похожие инструкции для 28203

Бренды по названию

Популярные бренды

GE 28203, Руководство пользователя

Результаты поиска

Содержание 28203

Отзывы:

Похожие инструкции для 28203

Бренды по названию

Популярные бренды