17
Area Code
If you enter your local 3-digit area code in the area code menu, your local area code
does not display on the Caller ID (CID) list. Instead, you only see the local 7-digit
number. Calls received from outside your local area code will display the full 10-digits.
From the
PHONE SETTING
menu;
1. Use the
6
or
5
button to scroll to
SET AREA CODE
.
. Press the SELECT button to enter the menu.
3. Use the number keys to enter your 3 digit area code. “ - - - “
is the default setting.
4. Press the SELECT button to save your selection. You will
hear a confirmation tone.
NOTE: To restore the default setting to “---”, press and release the
FLASH/DELETE button when
SET AREA CODE
shows on the display.
Registration
Your handset is pre-registered and ready to use. It is not recommended that handset
be registered again unless absolutely necessary.
From the
PHONE SETTING
menu;
1. Use the
6
or
5
button to scroll to
REGISTRATION
.
. Press the SELECT button to enter the menu.
3. Use the
6
or
5
button to scroll to
NO
or
YES
. The default
is
NO
.
4. If you select
YES
, press the SELECT button to confirm.
HOLD BASE PAGE WAIT FOR BEEP
shows on the display.
5. Press and hold the PAGE button on base unit until you
hear a long tone at the handset.
HANDSET X REGISTERED
shows in the handset display, where
X
is the handset
number. You will hear a confirmation tone.
NOTE: After you have registered one handset, wait 10 seconds
before registering another handset to ensure successful registration.
— — —
SET AREA CODE
SET AREA CODE
REGISTRATION
YES
NO
REGISTRATION
