GE 28031xx2 страница 46 Скачать руководство пользователя | Manualshive

Страница: 46 / 54

background image

4

t

rouBleshootinG

G

uiDe

t

elephone

s

olutions

No dial tone
•  Check or repeat installation steps:
  Make sure the base power cord is connected to a working electrical outlet.
  Make sure the telephone line cord is connected to the base and the wall jack.
•  Connect another phone to the same jack. If it doesn’t work, the problem might be

your wiring or local service.

•  The handset may be out of range of the base. Move closer to the base
•  Make sure the battery is properly charged (for 16 hours).
•  Make sure the battery pack (in the handset) is properly installed.
•  The handset should beep when you press the TALK•CALL BACK button, and the

charge indicator on the base should be lit when the handset rests in the cradle. If

not, the battery may need to be charged.

• Place handset in charge cradle for at least 20 seconds to reset the unit.

Handset does not ring
• Make sure the handset ringer is set to ON, this can be done through the handset

setup menu - Ringer Volume.

•  The handset may be out of range of the base. Move closer to the base.
•  You may have enabled Do Not Disturb (DND). Make sure the DND is off.
•  You may have too many extension phones on your line. Try unplugging some

extension phones.

•  Check for a dial tone.
You experience static, noise, or fading in and out
•  The handset may be out of range of the base. Move closer to base.
•  Make sure base is not plugged into an electrical outlet with another household

appliance. If necessary, relocate the base.

•  Charge the battery (for 16 hours).
Unit beeps
•  Clean the charging contacts on the cordless handset.
•  See solutions for “No dial tone ” on previous page.
•  Replace the battery.

«
...
44
45
46
47
48
...
»

Содержание 28031xx2























































Отзывы:

Нет отзывов

Похожие инструкции для 28031xx2

JBL Quantum 800

Бренд: Harman Страницы: 28

Бренд: U-Needs Commerce Страницы: 7

Бренд: U-Needs Commerce Страницы: 9

Savi Office WO100

Бренд: Plantronics Страницы: 24

Бренд: Logitech Страницы: 10

Бренд: Plantronics Страницы: 2

Бренд: MOTECK Страницы: 2

Бренд: BlueParrott Страницы: 2

Бренд: Iluv Страницы: 20

Бренд: fontastic Страницы: 10

Бренд: Jabra Страницы: 2

Бренд: Trevi Страницы: 16

Бренд: Yealink Страницы: 4

Бренд: Mr Handsfree Страницы: 73

Бренд: IQ Sound Страницы: 3

Bloutooth wireless headset

Бренд: Monoprice Страницы: 4

Бренд: RocketFish Страницы: 2

Бренд: RocketFish Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды