background image

51

What your warranty does not cover:

•  Customer instruction. (Your Owner ’s Manual provides information regarding operating instructions and user 

controls. Any additional information, should be obtained from your dealer.)

•  Installation and setup service adjustments.
•  Batteries.
•  Damage from misuse or neglect.
•  Products which have been modified or incorporated into other products.
•  Products purchased or serviced outside the USA.
•  Acts of nature, such as but not limited to lightning damage.

Product Registration:

•  Please complete and mail the Product Registration Card packed with your unit. It will make it easier to 

contact you should it ever be necessary. The return of the card is not required for warranty coverage.

Limitation of Warranty:

•  THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER 

WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN 

INFORMATION GIVEN BY ATLINKS USA, INC., ITS AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY 

OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.

•  REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE 

CONSUMER. ATLINKS USA, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES 

RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR 

IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY 

ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY 

APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

How state law relates to this warranty:
•  Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations 

on how long an implied warranty lasts so the above limitations or exclusions may not apply to you.

•  This warranty gives you specific legal rights, and you also may have other rights that vary from state to 

state. If you purchased your product outside the USA:

•  This warranty does not apply. Contact your dealer for warranty information.

Содержание 28031xx2























































Отзывы: