14
3. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone.
Ringer Level
NOTE:
This setting may only be made with the base.
1. Press the FLASH/PROGRAM button until
SET RING LEVEL
shows in the
display.
1HI
is the default setting.
2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use
the REVIEW or NEXT button to scroll to your selection.
3. Press FLASH/PROGRAM again to store your selection.
NOTE:
If you turn the ringer OFF, “
RINGER OFF
” shows in the base display.
Ringer Tone
NOTE:
This setting may be made on both the base and the cordless handset,
independent of each other.
You may choose from three different ringer tones.
1. Press the FLASH/PROGRAM button until
SET RINGER TONE
or
RINGER
TONE
shows on the display. The default ringer tone is
1
.
2. Use the touch-tone pad to select 1, 2, 3 or use the REVIEW or NEXT
button on the base unit or CID/VOL (
or
) button on the handset to
scroll to your selection. The ringer tone plays for few seconds.
3. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone.
Tone/Pulse
NOTE:
This setting may only be made with the base.
Most telephone systems use tone dialing, however, some may still use pulse
dialing. Depending on your telephone system, set the dialing mode as follows:
1. Press the FLASH/PROGRAM button until
SET TONE/PULSE
shows on the
display. The default setting is
1
TONE
.
2. Use the touch-tone pad to select
1TONE
or
2 PULSE, or
press the REVIEW
or NEXT button to scroll to
1TONE
or
2 PULSE
.
3. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone.
